SOLID MARINE FASTENER GRADE SILICON BRONZE WOOD SCREWS
Traditional Cut thread woodscrews made from marine fastener grade 97% copper silicon bronze.
Silicon bronze has a rose gold patina when new or polished. If allowed to age, it will develop a red hued brown tone, akin to Florentine bronze, and is the recommended option for fastening Florentine bronze hardware.
The ultimate in corrosion resistance - with no iron in the alloy composition, silicon bronze can not rust, unlike any steel based alloy.
Silicon bronze is a chemically inert fastener which cannot rust, making it the premier decking or cladding screw, that is not reliant on any coating that may fail in time.
SLOT DRIVE FLAT
A traditional countersunk or flat head woodscrew with a traditional slot drive - designed to finish flush with the surface of your timber/hardware.
With deep well cut slots, these screws can be power driven with the correct size driver tip.
Stock sizes: 4g - 20g.
SQUARE DRIVE FLAT
A countersunk or flat woodscrew with a square (robinson) drive. With deep set square socket, our screws have a positive engagement, enabling a rigid alignment of the fastener
on the driver, ideal for hard to reach places.
Stock Sizes: 6g - 24g
TORX DRIVE FLAT
The premier decking and cladding screw, a countersunk or flat head woodscrew with a 6-point star drive.
The great advantage of these fasteners in the decking application is a driver with no out of line position, they are faster to install with a superior aesthetic finish.
The driver is faster to engage and disengage than a traditional square, with an added advantage of being able to engage the drive up to 15 degrees off centre to drive.
Stock Sizes: 8g - 10g
SLOT DRIVE OVAL
With an oval or raised head, this screw has both a countersink to recess into your work, and a raised head to provide a stylish and unqiue finish. Ideally suited to handles, old style switch surrounds and other antique hardware and fixings as well as woodwork.
Stocked sizes: 4g - 10g.
SLOT DRIVE ROUND
A round or dome head, this screw finishes proud to your timber/hardware, with a hemispherical head.
Stocked Sizes: 4g - 12g
SQUARE DRIVE ROUND
A round or dome head, this screw finishes proud to your timber/hardware, with a hemispherical head.
With deep set square socket, our screws have a positive engagement, enabling a rigid alignment of the fastener on the driver, ideal for hard to reach places.
Stocked Sizes: 8g - 10g
HEX LAG SCREW
Timber lag bolt, hex lag screw or coach is a large silicon bronze timber woodscrew with a hex head.
This is a heavy duty fastener, generally used for attaching metal
components to timber such as gate hinges.
It is vital to ensure that this fastener has a correct size pilot hole, as an insufficient pilot will likely result in torsion failure on
installation. See our pilot hole guide for more information.
Stocked Sizes: 1/4" - 5/8" - unlike woodscrews, this fastener size is the plain shank measurement
HANGAR BOLT
A hangar bolts is a large silicon bronze timber woodscrew and machine screw. Nominally half timber and half machine screw, they are designed to be fastenered in to timber with additional hardware fastened with a nut and washer on the top.
Stocked Sizes: 3/8 - 5/8" UNC